A very fast and memory efficient class to encode and decode to and from BASE64 in full accordance with RFC 2045.
On Windows XP sp1 with 1.4.2_04 and later ;), this encoder and decoder is
about 10 times faster on small arrays (10 - 1000 bytes) and 2-3 times as fast on larger arrays (10000 - 1000000 bytes) compared to sun.misc.Encoder()/Decoder().
On byte arrays the encoder is about 20% faster than Jakarta Commons Base64 Codec for encode and about 50% faster for decoding large arrays. This implementation is about twice as fast on very small
arrays (< 30 bytes). If source/destination is a String this version is about three times as fast due to the fact that the Commons Codec result has to be recoded to a
String from byte[], which is very expensive.
This encode/decode algorithm doesn't create any temporary arrays as many other codecs do, it only allocates the resulting array. This produces less garbage and it is possible to handle arrays twice
as large as algorithms that create a temporary array. (E.g. Jakarta Commons Codec). It is unknown whether Sun's sun.misc.Encoder()/Decoder() produce temporary arrays but since
performance is quite low it probably does.
The encoder produces the same output as the Sun one except that the Sun's encoder appends a trailing line separator if the last character isn't a pad. Unclear why but it only adds to the length and
is probably a side effect. Both are in conformance with RFC 2045 though.
Commons codec seem to always att a trailing line separator.
Note! The encode/decode method pairs (types) come in three versions with the exact same algorithm and thus a lot of code redundancy. This is to not create any temporary arrays for
transcoding to/from different format types. The methods not used can simply be commented out.
There is also a "fast" version of all decode methods that works the same way as the normal ones, but har a few demands on the decoded input. Normally though, these fast verions should be used if
the source if the input is known and it hasn't bee tampered with.
If you find the code useful or you find a bug, please send me a note at base64 @ miginfocom . com.
Licence (BSD): ==============
Copyright (c) 2004, Mikael Grev, MiG InfoCom AB. (base64 @ miginfocom . com) All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above
copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with the distribution. Neither the name of the MiG InfoCom AB nor the names of its contributors may be used to endorse or promote
products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
| Type | Name and description |
|---|---|
static byte[] |
decode(char[] sArr)Decodes a BASE64 encoded char array. |
static byte[] |
decode(byte[] sArr)Decodes a BASE64 encoded byte array. |
static byte[] |
decode(String str)Decodes a BASE64 encoded String. |
static byte[] |
decodeFast(char[] sArr)Decodes a BASE64 encoded char array that is known to be resonably well formatted. |
static byte[] |
decodeFast(byte[] sArr)Decodes a BASE64 encoded byte array that is known to be resonably well formatted. |
static byte[] |
decodeFast(String s)Decodes a BASE64 encoded string that is known to be resonably well formatted. |
static byte[] |
encodeToByte(byte[] sArr, boolean lineSep)Encodes a raw byte array into a BASE64 byte[] representation i accordance with RFC 2045. |
static char[] |
encodeToChar(byte[] sArr, boolean lineSep)Encodes a raw byte array into a BASE64 char[] representation i accordance with RFC 2045. |
static String |
encodeToString(byte[] sArr, boolean lineSep)Encodes a raw byte array into a BASE64 String representation i accordance with RFC 2045. |
Decodes a BASE64 encoded char array. All illegal characters will be ignored and can handle both arrays with and without line separators.
null if the legal characters (including '=') isn't divideable by 4. (I.e. definitely corrupted).sArr - The source array. null or length 0 will return an empty array.Decodes a BASE64 encoded byte array. All illegal characters will be ignored and can handle both arrays with and without line separators.
null if the legal characters (including '=') isn't divideable by 4. (I.e. definitely corrupted).sArr - The source array. Length 0 will return an empty array. null will throw an exception. Decodes a BASE64 encoded String. All illegal characters will be ignored and can handle both strings with and without line separators.
Note! It can be up to about 2x the
speed to call decode(str.toCharArray()) instead. That will create a temporary array though. This version will use str.charAt(i) to iterate the string.
null if the legal characters (including '=') isn't divideable by 4. (I.e. definitely corrupted).str - The source string. null or length 0 will return an empty array. Decodes a BASE64 encoded char array that is known to be resonably well formatted. The method is about twice as fast as decode(char[]). The preconditions are:
+ The array must have
a line length of 76 chars OR no line separators at all (one line).
+ Line separator must be "\r\n", as specified in RFC 2045 + The array must not contain illegal characters within the
encoded string
+ The array CAN have illegal characters at the beginning and end, those will be dealt with appropriately.
sArr - The source array. Length 0 will return an empty array. null will throw an exception. Decodes a BASE64 encoded byte array that is known to be resonably well formatted. The method is about twice as fast as decode(byte[]). The preconditions are:
+ The array must have
a line length of 76 chars OR no line separators at all (one line).
+ Line separator must be "\r\n", as specified in RFC 2045 + The array must not contain illegal characters within the
encoded string
+ The array CAN have illegal characters at the beginning and end, those will be dealt with appropriately.
sArr - The source array. Length 0 will return an empty array. null will throw an exception. Decodes a BASE64 encoded string that is known to be resonably well formatted. The method is about twice as fast as decode(String). The preconditions are:
+ The array must have a
line length of 76 chars OR no line separators at all (one line).
+ Line separator must be "\r\n", as specified in RFC 2045 + The array must not contain illegal characters within the encoded
string
+ The array CAN have illegal characters at the beginning and end, those will be dealt with appropriately.
s - The source string. Length 0 will return an empty array. null will throw an exception. Encodes a raw byte array into a BASE64 byte[] representation i accordance with RFC 2045.
null.sArr - The bytes to convert. If null or length 0 an empty array will be returned.lineSep - Optional "\\r\\n" after 76 characters, unless end of file. Encodes a raw byte array into a BASE64 char[] representation i accordance with RFC 2045.
null.sArr - The bytes to convert. If null or length 0 an empty array will be returned.lineSep - Optional "\\r\\n" after 76 characters, unless end of file. Encodes a raw byte array into a BASE64 String representation i accordance with RFC 2045.
null.sArr - The bytes to convert. If null or length 0 an empty array will be returned.lineSep - Optional "\\r\\n" after 76 characters, unless end of file.Groovy API Documentation for Geb 2.1 - Licensed under the Apache License, Version 2.0 - http://www.gebish.org